HP LaserJet 4000 Printer series - Output Bin Command

background image

Output Bin Command

This command selects the destination bin into which the print job is
output when printed.

?

&

l

#G

Note

The Output Bin command is not recommended. Instead, it is
preferred that the PJL OUTBIN command be used to set the default
media destination.

# =

0

- Automatic selection

1

- Selects bin #1 (printer top/face-down bin)

2

- Selects bin #2 (printer left/face-up bin; this bin not

available when the High Capacity Output (HCO) is
attached)

3

- Selects bin #3 (HCO face up bin)

4

- Selects bin #4 (HCO #1 face down bin)

5

- Selects bin #5 (HCO #2 face down bin)

6

- Selects bin #6 (HCO #3 face down bin)

7

- Selects bin #7 (HCO #4 face down bin)

8

- Selects bin #8 (HCO #5 face down bin)

9

- Selects bin #9 (HCO #6 face down bin)

10

- Selects bin #10 (HCO #7 face down bin)

11

- Selects bin #11 (HCO #8 face down bin)

Default

= 0

Range

= 0 to 11

background image

2-78 Printer-Specific Differences

ENWW